630 nm, 50:50, 1x2 MM coupler (105/125um, N.A 0.22), 1 m bare fiber
Specification
Item
Parameters
Operating Wavelength
630 nm
Fiber Option
105/125 um
NA of Fiber
0.22
Configuration
1x2
Excessive Loss(Typical)
≤2 dB
Uniformity(Typical)
≤2.5 dB
Operating Temperature
-5 ℃~70 ℃
Explanation of Specifications
This tab provides a brief explanation of how we determine several key specifications for our 1x2 couplers. The legs of the coupler are defined as shown in the diagram below.
Figure does not represent a specific coupling ratio (for demonstrational purposes only)
Excess Loss Excess loss in dB is determined by the ratio of the total output power to the total input power:
Pport1 is the input power at port 1 and Pport2+Pport3 is the total output power from Ports 2 and 3. All powers are expressed in mW.